DMT Insight 10 Multiplication & Division Grades 3-5

The Power of Division

Many students can compute a quotient without knowing what it counts. You will learn the two structures of division and how the language of total, unit, and iterator makes them visible. The shift is from finding the quotient to asking, every time, what the quotient counts.

Questions for your classroom

  1. In 18 ÷ 3 = 6, the 6 might count coops or chickens, depending on the situation. How can students determine what the quotient counts?
  2. A student solves a sharing problem and a measuring problem with the same equation. How would you know whether they see the difference?
  3. What do your students say when you ask what the answer to a division problem counts?

Read the Insight

The Power of Division: Understanding What the Quotient Counts

Introduction

A student writes 18 ÷ 3 = 6. The answer is correct, but what does the 6 count?

If 18 chickens are placed into coops that hold 3 chickens each, the 6 counts coops. Suppose 18 chickens are shared equally among 3 coops; the 6 counts chickens in each coop. The equation is the same. The mathematical question is not.

That distinction matters. In a U.S. longitudinal sample, knowledge of division at ages 10 to 12 was one of the strongest elementary mathematics predictors of high school mathematics achievement, after the researchers accounted for other mathematical knowledge, general intellectual ability, working memory, and family income and education (Siegler et al., 2012). However, understanding division requires more than calculating a quotient. Students need to understand the relationship among the total, the unit, and the number of iterations.

This Insight examines the two structures of division, the language that makes those structures visible, and how students can move from informal strategies toward increasingly efficient procedures.

Division relates a total, a unit, and an iterator. A correct quotient does not necessarily show whether the student knows what the quotient counts.

Total, Unit, and Iterator

The words total, unit, and iterator make the structure of multiplication and division visible. They do not replace dividend, divisor, and quotient. They describe what the quantities are doing in the relationship (Brendefur et al., 2013; Fosnot & Dolk, 2001). Multiplication composes a total by iterating a unit, so six threes names six iterations of the unit 3, composing a total of 18. Division reverses that relationship by finding either the unit or the number of iterations.

Multiplication: iterator × unit = total

Total (dividend). The entire quantity being divided.

Unit. The size of each equal quantity. Iterator. The number of iterations of the unit. It tells how many times the unit is counted.

The dividend is always the total. The symbols alone do not determine which quantity is the unit and which is the iterator. The situation does.

Measurement division: total ÷ unit = iterator

Partitive division: total ÷ iterator = unit

Without context, 18 ÷ 3 can be read as: How many units of 3 compose 18? Six iterations of the unit 3 compose the total 18.

18 ÷ 3 = 6

6 × 3 = 18

Division and multiplication describe the same multiplicative relationship from different directions. This language keeps attention on that relationship. Students can ask what the total represents, what quantity is being treated as one unit, and how many times that unit is iterated. The same language works when division extends beyond whole numbers. Familiar classroom language such as equal groups remains useful when it names a representation or a problem type, and students keep their own words while the explanatory language stays precise.

The dividend is always the total. The first question a student answers is which of the unit and the iterator the divisor names, and the situation supplies the answer.

Two Situations, One Relationship

The same division equation can represent two different questions, depending on what is known and what is unknown (Fischbein et al., 1985; Kouba, 1989). A student who distinguishes the two situations can explain what the quotient represents, not simply compute it.

Measurement division, also called quotitive division, asks how many units of a known size compose the total. A farmer has 18 chickens and puts them in coops that hold 3 chickens each. The unit is known. The iterator is unknown, and the quotient counts coops. Students model this situation by iterating the unit along a number line or by subtracting it repeatedly.

Total ÷ unit = iterator

18 chickens ÷ 3 chickens per coop = 6 coops

Partitive division, also called fair sharing division, asks how large each unit must be when the total is partitioned into a known number of equal units. The same farmer distributes 18 chickens equally among 3 coops. The iterator is known: 3 tells how many equal units the total is partitioned into. The unit is unknown, and the quotient is the number of chickens in each coop. Students model this situation by partitioning a bar model into 3 equal units or by dealing out one at a time, the strategy children bring to division before instruction (Squire & Bryant, 2002).

Total ÷ iterator = unit

18 chickens ÷ 3 coops = 6 chickens per coop

Both situations are written as 18 ÷ 3 = 6, and in both the 6 is correct. In one, the 6 counts coops; in the other, it counts chickens. If a student cannot say which, the correct answer tells us less about what the student understands.

Same equation, different question, Measurement, Partitive

Known, Total and unit, Total and iterator

Unknown, Iterator, Unit

18 ÷ 3 = 6, How many units of 3 compose 18?, If 18 is partitioned into 3 equal units, how large is each unit?

The quotient counts, The number of units, The size of each unit

Students do not necessarily reason about these two structures in the same way. Research has found different strategies for partitive and measurement situations, making experience with both important (Fischbein et al., 1985; Kouba, 1989). Measurement problems draw repeated subtraction, and partitive problems draw dealing out (Kouba, 1989; Mulligan & Mitchelmore, 1997). Young children also grasp the relationship among the total, the divisor, and the quotient on tasks that require no calculation, placing conceptual understanding ahead of procedure (Correa et al., 1998).

The two situations are not equally available to students. Fischbein et al. (1985) found that students hold an implicit model of division as sharing, and that the model constrains what they accept as a division problem. The asymmetry reaches teachers as well. Roche and Clarke (2013) asked 378 primary teachers to represent division and to match story problems to a given form, and found them markedly more familiar with partitive than with quotitive division.

Sharing fixes the iterator and finds the unit. Measuring fixes the unit and finds the iterator. One relationship, two situations, and the quotient counts something different in each.

CLASSROOM SNAPSHOT

Teacher: “A farmer has 18 chickens. The coops hold 3 chickens each. How many coops does the farmer need?”

Marisol: “Six. I did 18 divided by 3.”

Teacher: “What does the 6 tell you?”

Marisol: “Six chickens in each coop.”

Teacher: “And if the farmer had 3 coops and shared the 18 chickens evenly?”

Devon: “That is 18 divided by 3, too. However, then the 6 is the chickens, not the coops.”

Teacher: “So what tells you which one the 6 is?”

Devon: “The story. You have to know if they told you how many coops or how many go in a coop.”

From Informal Strategies to Formal Procedures

Students’ early strategies contain mathematics that can be formalized rather than replaced. Repeated subtraction, repeated addition, sharing, and counting can develop into chunking, partial quotients, and eventually a standard algorithm. When the algorithm comes before this reasoning has developed, students may learn the steps without understanding the relationships those steps represent (van Putten et al., 2005).

The development is not a rigid sequence of stages. It moves from informal reasoning, to making the relationship visible, to chunking known relationships, to connecting representations, to formalizing, and to developing fluency. This is consistent with what Realistic Mathematics Education describes as progressive mathematization (Treffers, 1987). Contexts generate the models, and models become tools for thinking rather than illustrations of a result (Fosnot & Dolk, 2001).

Build the relationship. Students model the situation directly. They deal out one at a time for sharing, and they iterate or repeatedly subtract the unit for measuring. A number line makes the iterations of the unit visible, and a bar model makes the partitioning of the total visible.

Use known relationships. Students stop iterating one unit at a time and take several at once by chunking, doubling, halving, and using multiples. A ratio table records the chunks as partial quotients and keeps the relationship between the iterator and the total in view. To divide 144 by 8, a student may record that 10 units of 8 compose 80, that 8 more units of 8 compose 64, and that 80 and 64 compose 144, so the iterator is 18. Van Putten et al. (2005) followed Dutch students for five months. They found that initially diverse chunking strategies converged on high-level chunking, in which students choose chunks by place value, and that how far a student progressed depended on prior knowledge and on the instructional materials.

Formalize the reasoning. The standard algorithm connects to the same decomposition and quotient relationships students use in partial quotients. It records those relationships more compactly. The algorithm should record mathematics students can already reason about; it should not introduce an entirely new way of thinking. Students who understand the reasoning behind the algorithm are better positioned to reconstruct it when they forget a step.

The standard algorithm records, more compactly, relationships students already use in chunking and partial quotients. It formalizes reasoning; it does not replace it.

Why the Distinction Matters Later

Students often develop an implicit model of division as sharing. That model works in many early problems and becomes limiting as the numbers and situations change (Fischbein et al., 1985).

Expecting the quotient to be smaller than the total. A student who reads every division as sharing expects the answer to be less than the total, which holds when the divisor is a whole number greater than 1 and fails as soon as it is not. When asked to divide 3 by one-half, such a student may answer one and one-half. The measurement reading asks: How many units of one-half compose 3? Six one-half units compose 3, so 3 ÷ 1/2 = 6. Rejecting a divisor larger than the dividend. The same implicit model makes 2 ÷ 5 look impossible. Reading it as sharing 2 among 5 restores it, and the answer is a unit smaller than 1. The measurement interpretation makes fraction division reasonable before introducing a reciprocal procedure. “Invert and multiply” records a relationship; it should not be the first explanation of that relationship.

Dividing by one-half asks how many one-half units compose the total. The reciprocal procedure records that relationship. It is not the first explanation.

What to Look For

A correct quotient does not necessarily show how a student is reasoning. These questions make the reasoning visible.

Can the student identify the total?

Can the student identify the unit?

Can the student tell what is being iterated or partitioned?

Can the student explain what the quotient counts?

Can the student connect the division equation to multiplication?

Can the student use known relationships to build the quotient?

Can the student connect those relationships to the written algorithm?

Two errors show which question a student has not yet answered.

Reporting a remainder without naming what it counts. A student who reports a remainder of 2 without saying what the 2 counts may have stopped reading the situation. What is left over is a quantity of the total, less than one more complete unit, and whether to round up, round down, or report a fraction depends on what the iterator counts.

Treating division and multiplication as separate procedures. A student who does not hold the inverse relation may check a quotient by dividing a second time rather than by multiplying the unit by the iterator. That relation extends directly to fractions, where a fraction is itself a division (Jordan et al., 2013).

Each question asks for the same structure: what the total is, what the unit is, what is being iterated or partitioned, and what the quotient counts.

Conclusion

Division makes relationships among quantities especially visible. The structure that makes 18 ÷ 3 readable makes a fraction readable, because three-fourths is 3 divided by 4. It makes a rate readable, because miles per hour measures a total in units of one hour. It also makes proportional reasoning readable, because a ratio holds a unit constant while the iterator varies. Without that underlying structure, fractions, rates, and proportional reasoning can appear to students as new and unrelated procedures.

Instruction that builds the structure is specific. It names the total, the unit, and the iterator. It gives both situations from the beginning rather than teaching sharing first and measuring later. It lets students iterate, partition, and chunk, and it connects that reasoning to the algorithm. It asks what the answer counts every time, not only when the answer is wrong.

Division is one multiplicative relationship with two possible unknowns. Students who hold that relationship extend it to fractions, rates, and proportional reasoning; without it, each of those can appear as a new and unrelated procedure.

References

Brendefur, J., Thiede, K., Strother, S., Bunning, K., & Peck, D. (2013). Developing mathematical thinking: Changing teachers’ knowledge and instruction. Journal of Curriculum and Teaching, 2(2), 62-75. https://doi.org/10.5430/jct.v2n2p62

Correa, J., Nunes, T., & Bryant, P. (1998). Young children’s understanding of division: The relationship between division terms in a noncomputational task. Journal of Educational Psychology, 90(2), 321-329. https://doi.org/10.1037/0022-0663.90.2.321

Fischbein, E., Deri, M., Nello, M. S., & Marino, M. S. (1985). The role of implicit models in solving verbal problems in multiplication and division. Journal for Research in Mathematics Education, 16(1), 3-17. https://doi.org/10.5951/jresematheduc.16.1.0003

Fosnot, C. T., & Dolk, M. (2001). Young mathematicians at work: Constructing multiplication and division. Heinemann.

Jordan, N. C., Hansen, N., Fuchs, L. S., Siegler, R. S., Gersten, R., & Micklos, D. (2013). Developmental predictors of fraction concepts and procedures. Journal of Experimental Child Psychology, 116(1), 45-58. https://doi.org/10.1016/j.jecp.2013.02.001

Kouba, V. L. (1989). Children’s solution strategies for equivalent set multiplication and division word problems. Journal for Research in Mathematics Education, 20(2), 147-158. https://doi.org/10.5951/jresematheduc.20.2.0147

Mulligan, J. T., & Mitchelmore, M. C. (1997). Young children’s intuitive models of multiplication and division. Journal for Research in Mathematics Education, 28(3), 309-330. https://doi.org/10.5951/jresematheduc.28.3.0309

Roche, A., & Clarke, D. M. (2013). Primary teachers’ representations of division: Assessing mathematical knowledge that has pedagogical potential. Mathematics Education Research Journal, 25(2), 257-278. https://doi.org/10.1007/s13394-012-0060-5

Siegler, R. S., Duncan, G. J., Davis-Kean, P. E., Duckworth, K., Claessens, A., Engel, M., Susperreguy, M. I., & Chen, M. (2012). Early predictors of high school mathematics achievement. Psychological Science, 23(7), 691-697. https://doi.org/10.1177/0956797612440101

Squire, S., & Bryant, P. (2002). The influence of sharing on children’s initial concept of division. Journal of Experimental Child Psychology, 81(1), 1-43. https://doi.org/10.1006/jecp.2001.2640

Treffers, A. (1987). Three dimensions: A model of goal and theory description in mathematics instruction, The Wiskobas Project. D. Reidel. https://doi.org/10.1007/978-94-009-3707-9 van Putten, C. M., van den Brom-Snijders, P. A., & Beishuizen, M. (2005). Progressive mathematization of long division strategies in Dutch primary schools. Journal for Research in Mathematics Education, 36(1), 44-73. https://doi.org/10.2307/30034920

Next in this study path

Multiplicative reasoning 54 Multiplication and Division (MLP)

Ready to teach this?

Math Success has the classroom materials behind this Insight.

Core materials

  • Grade 3 · Unit 5 · Multiplication, Division & Area: Part 1
  • Grade 4 · Unit 2 · Multiplication, Division, Factors, & Multiples

Intervention materials

  • Whole Numbers · Multiplication / Division, grades 3-5
  • Fact Fluency · Multiplication / Division, grades 3-5

Games

  • Fluency Dash
  • Math Fluency with Sports: Multiplication & Division

PD video

  • Division: Models and Strategies for 492 ÷ 4
  • Division: Models and Strategies for 332 ÷ 4
  • Division: Modeling 3 ÷ 2

Get all of it for $21 a month

The Insights explain the mathematics. Math Success gives you the materials to teach it.

One subscription opens everything, for kindergarten through grade 8. You can start today.

Schools can enroll a whole building for $2,000 a year. See school plans

$21 a month per educator

  • All core materials
  • All intervention materials
  • Diagnostics
  • Games
  • Prep materials: online video professional development
Jonathan Brendefur

Who writes DMT Insights

Jonathan Brendefur, PhD

Jonathan founded the Developing Mathematical Thinking Institute. He spent 20 years as a Professor of Mathematics Education at Boise State University, working with teachers in their classrooms every week.

Each Insight is about 3 pages and lists the research it draws on, so you can read the studies yourself.

Keep developing mathematical thinkers.